My new Google Ads campaign shows Eligible but gets zero impressions. Is it the campaign or the account?
Eligible everywhere, zero impressions, one campaign. Clear what Google shows, read Keyword Planner for your area, then give the campaign a fair week. A zero after that leaves account-level causes as the remaining documented candidates, but doesn't prove a security review.
Last verified October 2026
A new Search campaign that reads Eligible everywhere and has served nothing for days isn't telling you it's fine. Plain Eligible means nothing Google checks at that level is stopping the ad, whether the level is campaign, ad group, ad or keyword. The statuses do flag some bid and budget trouble, as "Eligible (limited)" or "Below first page bid estimate". But plain Eligible doesn't promise that your bid can win. And no campaign status reports whether the account is under review, or whether anyone searches for your keywords inside your target area. Any of those can hold a campaign at exactly zero.
First, timing. Billing and account notices are worth checking on day one. For everything else, Google's line is three business days. If an ad has had no impressions by then, Google says to start working through the causes, while noting that the bid strategy "may still be in the bid strategy learning phase" (Google: campaigns not running or low traffic). New ads are usually reviewed within 24 to 48 hours, but new accounts can take up to 5 business days (Google: Search campaign not running). An ad still marked Under review is waiting, not broken. Make sure the date range starts at launch, too. The last three hours of data may not show yet (Google: find your first ads).
The question that decides the rest is whether the zero lives in the campaign or in the account. If it's the account, no campaign edit can help. Google's shortcut is to look at your other campaigns: if any are running, you don't have to check the account's status (Google: account issues). A new advertiser with one campaign has nothing to compare against, so the steps below build the comparison. Steps 1 to 3 clear what the account and its statuses show. Step 4 reads Keyword Planner for your area. Step 5 gives the campaign a fair week: an unedited week that tests four things, namely enough searches, a high enough bid, a big enough budget and enough time. If it still serves nothing, account-level causes are what's left on Google's documented list.
This is about Search campaigns that have never served, on Maximize Clicks or Manual CPC. If you bid for conversions, Google also lists insufficient conversion data as a reason ads don't run, and that isn't covered here. If your campaign served and then stopped after a pause, Cascader's restart answer is the better start. The same goes for an account that sat unused for a long time before you brought it back: see our answer on long-idle accounts. Ad Grants accounts run under the program's own rules, which a Google Product Expert's guide covers.
What can hold a new campaign at zero, and whether you'd see it
Google's troubleshooting lists mix causes of thin traffic with causes of none. Two questions sort them for this case: can the cause produce a true zero, and does it show anywhere in your account?
If columns extend beyond the page, scroll sideways. With a keyboard, focus the table and use the arrow keys.
| Cause | Can hold you at exactly zero | Shows in your account | Step |
|---|---|---|---|
| Billing: no valid payment method, a declined payment, prepaid funds spent, or a monthly-invoicing account budget reached | Yes. Ads won't run until billing is valid (Google: why you may not see your ad), and a reached account budget stops every ad (Google: account issues) | Yes, in Billing. On prepaid, a spent budget can also show as an Inactive bid strategy (Google: bid strategy statuses) | 1 |
| Account suspension, or an open verification task | Suspension: yes (Google: account issues). Pending verification is one of Google's common reasons for a daily spending limit (Google: daily spending limits) | Yes, as a notification (Google: campaigns not running or low traffic). Verification tasks are under Admin › Policy › Account (Google: security review) | 1 |
| Account daily spending limit | Not by Google's description. The limit "overrides any campaign-level budgets" and caps what the account can spend each day. When it's reached, ads "will stop showing and automatically resume the next day". Google's page doesn't describe a $0 limit. It's "often applied to new accounts" (Google: daily spending limits) | Usually. Google says you'll be notified, except for a cap placed during a security review (Google: security review) | 1, 5 |
| Account security review | Yes: it "can result in zero impressions or a temporary daily spending limit" (Google: Search campaign not running) | No. Google says there's no notification (Google: security review) | 5 |
| Limited ad serving | Google says it "may limit impressions on certain searches". It doesn't say whether that can mean none (Google: Limited ad serving) | An in-account notification goes to unqualified advertisers with a "meaningful proportion" of impressions in scope (Google: Limited ad serving) | 1 |
| Every keyword on low search volume, or every ad under review | Yes (Google: narrow targeting; Google: Search campaign not running) | Yes, in the Status column hover (Google: keyword status) | 2 |
| Ad schedule or audience targeting that leaves almost no one | Yes, if it leaves nobody to show to. Google says a campaign whose audience list is below its requirements "may not serve" (Google: narrow targeting), and to ensure ad scheduling "isn't overly restrictive" (Google: why you may not see your ad) | In settings, not in a status | 2 |
| Bids that can't win | Yes: a very low bid's ads "may not have any impressions" (Google: low bids) | Sometimes, as "Below first page bid estimate" (Google: keyword status) or bid strategy "Limited (Bid limits)" (Google: bid strategy statuses) | 2, 4 |
| A daily budget very low against your CPC | Yes: such ads "may struggle to enter auctions" (Google: why you may not see your ad) | Sometimes, as "Eligible (limited)", "either not serving or under serving" (Google: low budget) | 4 |
| Too few searches inside your targeting | Yes: a small radius may "prevent it from serving" (Google: narrow targeting) | Sometimes, as bid strategy "Limited (Inventory)": "limited by available search volume" (Google: bid strategy statuses). Not in keyword status, which judges worldwide volume (Google: low search volume) | 2, 4 |
The steps run from causes that announce themselves to causes that never do. That order has a reason. Each cause you clear early would otherwise make a later reading ambiguous. And the one step that costs money comes last, because its empty result only means something once everything visible is clear.
Step 1: Billing and account notices
Open Billing › Summary and Transactions. Look for:
- a missing or invalid payment method;
- a declined payment;
- on prepaid, the remaining balance;
- on monthly invoicing, whether the account budget is used up.
Then read every in-account notification, and go to Admin › Policy › Account for any verification task with a Start task button.
If there's no notification, read that carefully. Google says that "When a daily spending limit is applied, you'll be notified in your account." It also says a security review can place a temporary daily spending cap, and "You won't find a notification in your account about this review" (Google: daily spending limits; Google: security review). So a quiet account rules out the notified kinds of limit, but not the review.
Step 2: The statuses and settings behind Eligible
The bid strategy. Hover over its status in the campaign's Status column. If it's a portfolio strategy, check it under Tools › Bid strategies as well. Google's documented statuses are Inactive, Active, Learning, Limited and Misconfigured (Google: bid strategy statuses).
- Inactive. Google gives "some reasons": paused or unattached campaigns, all keywords or ads paused, or "A prepaid budget has been spent." If you pay in advance and nothing is paused, check the balance.
- Limited (Bid limits). Your cap is stopping the strategy from bidding higher.
- Limited (Inventory). Too little search volume.
- Misconfigured. On Maximize Clicks, this can mean a shared budget across campaigns that aren't all on the same portfolio strategy.
- Anything else. If the hover shows something that isn't one of these, ask support what it means rather than rebuilding the strategy.
Every keyword's hover, not just the word at the top.
- "Low search volume" on every keyword. That alone can explain the zero. Google says such a campaign is "likely unable to run" (Google: narrow targeting).
- "Below first page bid estimate". That points to price (step 4).
- "Rarely shown due to low Quality Score". Google means the keyword "isn't showing ads often" (Google: keyword status). If most of your keywords show it, fix that before step 5, or leave those keywords out of it. Otherwise the test can fail for a campaign reason and mislead you. Cascader's Quality Score answer covers the diagnosis.
Ads and settings. An ad Under review is a wait. A disapproved ad needs fixing. In settings, check the ad schedule, and check whether any audience is set to Targeting. Google suggests Observation for new Search campaigns. It also says to "Review your negative keyword lists to ensure you are not accidentally blocking relevant traffic" (Google: Search campaign not running).
Step 3: Ad preview, briefly
Open Tools › Troubleshooting › Ad preview and diagnosis. Set the location to a town inside your targeting, and search for a main keyword. A specific diagnosis is worth acting on. Any other answer settles nothing about the account:
- Google says the tool "might not reflect all real-time conditions", and that a "keyword not in account" error on an active keyword "might be a temporary tool inaccuracy" (Google: why you may not see your ad).
- For "Reason unknown", Google points to a recent bid strategy change and to low-volume keywords, and says to verify the account's status first (Google: Ad preview and diagnosis).
Don't keep rerunning it.
Step 4: Searches, price and budget in your area
Google decides "Low search volume" by looking at searches for the keyword worldwide over the past twelve months (Google: low search volume). A keyword can clear that bar because people search it somewhere, and still be searched almost never inside a five-mile circle. The keyword status can't tell you that. Google's narrow-targeting page names a small radius, a single postal code and a low-population city as settings that can stop a campaign serving at all.
Keyword Planner can. Go to Tools › Keyword Planner › Get search volume and forecasts and paste in your keywords (Google: use Keyword Planner). Then set the location to the places your campaign targets. Google's page lists locations "including countries, territories, regions, and cities"; enter the town or towns your circle covers (Google: refine keywords). For that location, Google describes three historical metrics (Google: Keyword Planner forecasts):
- Avg. monthly searches. How often people there searched the keyword and its close variants, counted as exact matches only.
- Top of page bid (low range). Roughly the 20th percentile of what advertisers paid to reach the top of the page there.
- Top of page bid (high range). Roughly the 80th percentile of the same.
Read three things off the page:
- Searches. Turn the monthly figure into a week: multiply by 7, then divide by 30.4. Google says search volume "is determined only for exact keyword matches, while your estimated impressions are based on your selected match types" (Google: Keyword Planner forecasts), so for phrase or broad keywords the count understates what they can match. If Planner returns an error instead of a number, Google says that happens for "Keywords with very low search volumes, or keywords that are considered sensitive" (Google: use Keyword Planner). So an error is an answer about demand only if your keywords aren't in a sensitive category.
- Price. Is your cap or bid near the top-of-page range, or far below it? A bid under the range doesn't prove it's the cause. Google says an ad can still appear when its bid is under the first-page estimate, which is a different figure (Google: first page bid estimate). But a campaign bidding well under it hasn't had a fair chance on price.
- Budget. Google's guideline is a daily budget of "at least 10 times your expected Cost-Per-Click (CPC)" (Google: campaigns not running or low traffic). It warns that a budget very low against your CPC can keep ads from entering auctions. If your budget clears ten times your expected CPC and the campaign isn't marked Eligible (limited), budget is unlikely to be what's holding it. If it doesn't, the budget is a live suspect.
Here's a hypothetical. A locksmith's new campaign targets six phrase-match keywords within 5 miles of one town. It runs on Maximize Clicks with a $3 cap and a $30 daily budget, and it has had no impressions for a week. Steps 1 to 3 are clean. With the town set as the location, Planner returns no volume for four of the keywords. The other two show 140 and 90 average monthly searches, about 7 or 8 a day between them, or about 53 a week. Their top-of-page low range is around $8.
So people do search there. But the $3 cap sits well below the low end of the range, which Google puts at roughly the 20th percentile of top-of-page bids. And if clicks there cost anything near $8, ten times that is $80 a day, not $30. That doesn't prove the cap caused the zero. It does mean the campaign hasn't yet had a fair chance, so its zero says nothing about the account.
Step 5: Give the campaign a fair week
If steps 1 to 4 are clean, you can write to support now, in parallel: asking costs nothing and doesn't have to wait for the fair week. The message is under "What to ask support" below. Send the result to the same case when you have it.
If steps 1 to 4 leave the account as a possibility, make the campaign meet these four conditions, all at once. Then leave it alone.
- Searches: at least about 30 in the week. Count them from Planner as in step 4, using only keywords that show volume in your area. Google gives no minimum; 30 is our rule of thumb, and the table below shows why. Below 30, widen before you test.
- Start with what Planner can count: more towns you'd actually serve, and more keywords that show volume there.
- Then use Google's two reach levers, which add searches Planner's exact-match count won't show. Google says "Consider adding broad Match keywords to capture a wider audience". It also suggests broadening a location setting of "Presence" only to "Presence or Interest" (Google: Search campaign not running).
- Price. Set the cap or bid at least at the top-of-page low range.
- With one Maximize Clicks cap, use the highest low range among the keywords you're counting on. On Manual CPC, set each keyword's bid at its own low range.
- On Maximize Clicks with no cap, there's no cap to hold against the range. Google says that without a maximum CPC bid limit, Google Ads "adjusts your bids to try to get you as many clicks as possible while spending your budget". It adds that setting one "can help you to control costs if you find your CPCs are higher than desired". If you add one, it falls under this condition, because Google notes that "if your CPC bid limits are too low, your bid strategy might not be able to help you achieve your goal" (Google: Maximize clicks).
- Google warns, "You might not see bid range statistics for keywords that have limited historical bid information" (Google: Keyword Planner forecasts). Where there's no range, use the keyword's first page bid estimate, in "the 'Est. first page bid' column in the Keywords table". Google adds that "The estimate isn't a guarantee" (Google: first page bid estimate).
- Bid adjustments apply on top of a Maximize Clicks cap (Google: Maximize clicks), so check that none pulls a bid back under the range.
- Budget. Set the daily budget "at least 10 times your expected Cost-Per-Click (CPC)", Google's guideline (Google: campaigns not running or low traffic). Know what that risks: "On a given day, your campaign might spend up to twice your average daily budget". Over a month, it spends no more than 30.4 times that budget (Google: overdelivery).
- Time: seven days with no edits, counted from the last change. Seven days is our choice, not Google's. A bid strategy setting change can put the strategy back into Learning (Google: bid strategy statuses). Google puts Smart Bidding's learning phase at "typically 5-7 days, but can be longer" (Google: why you may not see your ad), and says Maximize Clicks may need "a few days or weeks" (Google: Maximize clicks). So a zero inside the seven days can be the test's own doing. By Google's wording, a zero shortly after can be too.
Why about 30 searches. A healthy campaign won't show on every search. Suppose it wins only 1 search in 10, treating each search as a separate chance. That share is our assumption, since Google publishes none for a new campaign. Then the chance it shows on none of a week's searches falls like this:
If columns extend beyond the page, scroll sideways. With a keyboard, focus the table and use the arrow keys.
| Searches in the week | Chance of no impressions, winning 1 in 10 | Chance of no impressions, winning 1 in 20 |
|---|---|---|
| 5 | 59% | 77% |
| 10 | 35% | 60% |
| 20 | 12% | 36% |
| 30 | 4% | 21% |
| 60 | 0.2% | 5% |
At 30 a week, about 130 a month in Planner, a zero is unlikely for a healthy campaign winning 1 in 10, though not for one winning 1 in 20. So treat 30 as a floor, not a proof. An area that shows 20 a month holds under 5 searches a week, and a healthy campaign winning 1 in 10 would draw a blank there about 6 times in 10.
For the locksmith, 53 searches a week clears the floor in the town alone. The fair week means an $8 cap. If they expect clicks to cost the full $8, the budget is $80, and any single day could reach $160. If that's affordable, run it. If it isn't, there are two paths:
- run Planner for the neighboring towns the locksmith would drive to, and for related keywords where a $30 budget clears 10 times the expected CPC; or
- accept what Planner has already said: at this budget, the campaign can't meet what Google calls "A good guideline", 10 times the expected CPC, at the bids advertisers have historically paid to reach the top of the page here.
A cap you can't afford to lift is part of the answer, too. It's a campaign answer, not an account one.
After a fair week, read the result like this:
If columns extend beyond the page, scroll sideways. With a keyboard, focus the table and use the arrow keys.
| What happens | What it shows | Next move |
|---|---|---|
| Impressions arrive, whether they keep coming or stop after a few | The account can serve, at least for a time. It doesn't show which old setting was the gate, or, if impressions stop, why (see below the table) | If they keep coming: look at Avg. CPC and the search terms to see what the traffic costs. Keep only the settings you can afford, and change one thing at a time from here. If they stopped after a few: set them against the searches the week was expected to hold, and send support the message below before changing anything. If spend stops at about the same small amount each day, the next row governs |
| Spend stops at about the same small amount each day, below the budget | Consistent with an account daily spending limit. When a limit is reached, ads stop and resume the next day (Google: daily spending limits) | Look for the limit notification, then ask support whether a limit applies, and its amount |
| Still zero, but the week held fewer than about 30 searches | Inconclusive about the account. A healthy campaign can show on none of so few | Widen as in condition 1, then run another fair week |
| Still zero, with all four conditions met | Account-level causes are now the remaining documented candidates. That doesn't prove a security review, or which cause it is | Send support the message below. Leave the campaign enabled and unchanged, so it's ready the day anything lifts |
Why impressions that stop after a few point to support: Google says "An account security review can result in zero impressions or a temporary daily spending limit" (Google: Search campaign not running). It says limits are "often applied to new accounts or those with recent changes" (Google: daily spending limits), and "You won't find a notification in your account about this review" (Google: security review). Impressions that arrive may also mean a hold lifted on its own that week: Google says review limits are "typically removed automatically" (Google: Search campaign not running).
What to ask support
Google documents no way to see a security review yourself. One practitioner on r/PPC, replying to a post about an established account where every campaign had stopped, wrote: "Normally if you ask support directly they will confirm the security review" (r/PPC comment). That's one person's second-hand account, from a different situation. "Why am I getting no impressions?" invites the checklist you've already done. So ask about the mechanisms Google documents, each answerable yes or no. If you write before the fair week ends, leave out the bracketed sentence and add the result to the same case later. Where the message offers options separated by slashes, use the one that's true for you.
Customer ID [123-456-7890]. New Search campaign "[name]", launched [date], has had [zero impressions every day since / only [N] impressions, the last on [date]]. Campaign, ad groups, ads and keywords show Eligible. Billing is active with no declined payments, and the account shows no notifications. Advertiser verification shows [status]. [From [date] to [date] the campaign ran unchanged [at a cap or bids of $[X] or more, at or above Keyword Planner's top-of-page low range for [area] / at a cap or bids of $[X] or more, at or above the keywords' first page bid estimate, where Planner showed no range / on Maximize Clicks with no maximum CPC bid limit], with a $[Y] daily budget, and received [no impressions / [N] impressions, the last on [date]].] Ad preview from [town] returns "[exact message]".
Please check and confirm:
- Is the account under a security review, and is anything needed from us?
- Is a daily spending limit applied to the account? If so, what is the amount?
- Is the account's ad serving restricted under the Limited ad serving policy?
- Is any verification, payment or policy step outstanding?
Please give us a case number for follow-up.
Question 1 names the cause Google says carries no notification. Question 2 asks for the amount, because the amount tells you what the account can still spend. The case number turns your next contact into a follow-up, not a fresh start. Keep your customer ID out of public forums.
If support says it can't help, or no human channel appears, keep the case number and the campaign as it is. Our answer on long-idle accounts walks through the Contact us route and what each kind of reply means. The route there applies to a new account too.
While you wait on Google
Google says automated security reviews "cannot be expedited". Once a review is complete, spending limits are typically removed automatically and campaigns resume normal spending (Google: Search campaign not running). Its page on these reviews says they can happen when an account "doesn't have a history of policy compliance", which no new account has yet (Google: security review). The steps it lists are the ones in your control:
- Access. Under Admin › Access and security, confirm that every administrative user is someone you authorized, and add your team's email domains to Allowed domains.
- Verification. Complete advertiser verification if a task is waiting.
- History. Pay on time and keep the ads compliant. If none of that works, Google suggests linking the account to a manager account that has a history of policy compliance.
If your ads name other companies' brands, or carry no clear branding of your own, Limited ad serving applies to exactly that situation. Google's Search advice is to complete verification and show your own brand clearly in the ads and on the landing page (Google: Limited ad serving).
Two moves cost more than they promise:
- A second account. Google prohibits practices that "circumvent or interfere with Google's advertising systems and processes" (Google: Abusing the ad network). Whether a second account would be read that way is Google's call. Cascader's account-gates piece explains why, at the verification and payment gates, a new account appears to start linked to the old one rather than fresh.
- Switching bid strategies again. Each change can send the strategy back into Learning, and gives you a muddier record to show support.
Google publishes no duration for these reviews. The useful date is the one you set yourself: when you'll follow up on the case number.